Meshnology promo code: 8%, 10% or 15% off LoRa and Meshtastic hardware
Meshnology publishes several codes: 8% off for new customers with a $50 minimum, a one-time 15% code, a one-time 10% code and an unlimited 10% code with no minimum. How I would pick the right one for a first order or a repeat purchase of IoT hardware.
Some links in this article lead to partner services. If you make a purchase there, the site may receive a commission; this does not affect the price or our assessment.
The current Meshnology codes are in the block right under the title. As of 8 October 2026 the store publishes four codes valid worldwide: 8% off site-wide for new customers with a $50 minimum, valid on all products including LoRa and Meshtastic kits; a 15% code usable once per customer with no minimum; a 10% code usable once per customer with no minimum; and a store-wide 10% code with unlimited use and no minimum.
Which code to use
Situation | Best published code | Why |
|---|---|---|
First order | 15%, once per customer | The highest percentage, no minimum |
15% already used | 10%, once per customer | Next best one-time code |
Repeat orders | 10% unlimited | Works every time, no minimum |
8% new-customer code | Only if the others are refused | Lower and needs $50 |
In practice: use the 15% code once, then rely on the unlimited 10% code for later orders.
How I would apply it
Plan the parts for your build, fill the cart, copy the right code from the block above and open Meshnology with the button next to it. Enter the code at checkout and check the discount. You can also open Meshnology and browse the kits first.
Buying LoRa and Meshtastic hardware
Before ordering radio hardware, check the frequency band allowed in your country, since LoRa devices are sold for different regional bands and the wrong one may be illegal or useless where you live. Make sure the board, antenna and enclosure match, that the antenna connector type fits, and that you have a suitable battery and charging setup. For Meshtastic, confirm that the board is supported by the firmware you plan to flash.
Getting the most from one-time codes
Because the 15% and 10% one-time codes work once per customer, use them on the order with the largest total, for example the first full kit, rather than on a single antenna. Put spare parts you know you will need, such as extra antennas or enclosures, into that order too.
Why a code fails
Already used. The 15% and one 10% code are once per customer.
Minimum not met. The 8% code needs $50.
One code per order.
Common questions
Is the unlimited 10% really unlimited? The store describes it as unlimited use with no minimum.
Do the codes cover all products? They are described as store-wide or site-wide.
Will they end? No end date is announced; the block above updates several times a day.
Before paying
the frequency band is allowed in your country;
board, antenna and enclosure match;
the firmware supports the board;
the best code for this order is applied.
When it fits, order from Meshnology. The store sets the final terms.
